SVR-110 Portable Screw Hardness Tester

Mode/Code: SVR-110H/#882-110
Hardness Range: HV 80-1599; HRC 20-70;
Accuracy: ±3% HV; HR:±1.5HR
Testing force: Manual 10N

1. Introduction

SVR-110 is a special manual portable durometer with manual probe HP-1K by Sinowon group. It applies method of ultrasonic contact independence to make hardness testing at the spot

SVR-110 is a NDT durometer due to the contact indention is too small to observe, it is one of the excellent solution to test hardness of finished products, such as, the mold, gear, shaft, rod, screw, rails, etc.

SVR-110 conforms the standard ASTM A1038-2005, DIN standard DIN50159-1-2008 and China National standard GB/T 34205-2017.


2. Features:

2.1High Accuracy

HV: ±3% HV,HR:±1.5HR, Conform internal standard ASTM A1038, DIN50159.

2.2Microscopic Indentation

The indention size of SVR-110 is same with HV1 of micro hardness testing in one specimen , it is too small to observe by eyes, it is a non-destructive method for the specimen. 

2.3Qucik Measurement

In 2 seconds to get hardness value, working efficiency is 60 times higher than normal bench hardness testers. 


3. Specification

Product Name Portable Screw Hardness Tester
Model SVR-110H
Code# 882-110
Testing force Manual 10N
Hardness Range HV 80-1599; HRC 20-70;
Accuracy ±3% HV; HR:±1.5HR
Measuring Scales HV/HRC
Language English, Chinese
Data Output RS232
Data Saving 20-group calibration data, 1000-group measurement data
Working Conditions Temp: -10℃~50℃; Humidity: 30%~80%
Power Supply Rechargeable lithium battery,battery 4.2V,3200mAh
Rechargeable Voltage AC220V/50Hz, 110V/60Hz


4.Standard Delivery

Accessories Code # Accessories Code #
Instrument 882-110H 10N manual probe 882-241
Ultrasonic Hardness Block 882-641 Probe cable 882-801
USB Charger with Cable 882-851 COM Cable 852-810
Toolbox 882-901 Screwdriver 882-951
Operation manual SVR-110H Warranty card SVR-110H
Qualified Certificate SVR-110H Packing list SVR-110H


5. Optional Accessories

Accessories Code # Accessories Code #
MU-100 Testing Stand 882-301 Plan Support Ring 882-511
MU-200 Testing Stand 882-201 Small Cylinder Support Ring 882-521
MU-300 Testing Stand 882-101 Big Cylinder Support Ring 882-531
MU-400 Testing Stand 882-401 V-shape Support Ring 882-551
Ultrasonic Hardness Block(28~35)HRC 882-611 Probe Silicone Cap 882-711
Ultrasonic Hardness Block (38~45)HRC 882-621 Lengthened Probe Silicone Cap 882-721
Ultrasonic Hardness Block (48~55)HRC 882-631 Mini Printer 882-831
Ultrasonic Hardness Block (300-800)HV1 882-651 10N Manual Probe 882-311
Ultrasonic Hardness Block (300-800)HV5 882-661 50N Manual Probe 882-331
Ultrasonic Hardness Block (300-800)HV10 882-671 98N Manual Probe 882-341
8N Motorized Probe 882-241 3N Motorized Probe 882-211
10N Motorized Probe 882-251 5N Motorized Probe 882-231


Request For Quotation

Company*

Address

Linkman *

Mobile *

E-mail*

Website

Department

Inquiry message*

Budget Plan